Product Description
It is suitable for the detection of O2, CO2, N2 and air permeability of plastic film, composite film, high barrier material, sheet, metal foil, rubber and other materials.
Technical parameters
Item |
Parameter |
Model |
GTR-V3 |
Measurement range(film) |
0.1~50.000cc/m2·24hours·0.1MPa |
Sample quantity |
3 |
Main sensor quantity |
3 |
Test mode |
single chamber independant |
Vacuum precision |
0.01Pa |
Vacuum degree |
<10Pa |
Temperature control range |
5ºC~95ºC |
Humidity control range |
0%RH,2%RH~98.5%RH±3%RH(note1) |
Temperature control precision |
±0.05ºC |
Temperature resolution |
0.01ºC |
Test pressure |
-0.1 MPa~+0.3MPa(regular) |
Air source pressure |
0.4 MPa~0.6 MPa |
Test air |
O2, N2 and CO2 (Outside of Supply) |
Interface of carrier gas |
Ф6 |
Vacuum tube diameter |
1/4" |
Calibration mode |
Calibration of standard film and external calibration of vacuum sensor |
Sample thickness |
≤3mm |
Sample size |
Φ97mm |
Permeability area |
38.48 cm2 |
Size |
760 mm (L) × 575 mm (W) × 450 mm (H) |
Test principles and product description
GTR-V3 adopts the differential pressure method test principle; the pre-processed sample is placed between the upper and lower test chambers, and clamped.First, the low pressure chamber (lower chamber) is vacuumized, and then the whole system is vacuumized; when reaching the specified vacuum degree, close the test chamber, to the high pressure chamber (upper chamber) filled with a certain pressure of the test gas, and ensure the formation of a constant pressure difference on both sides of the sample (adjustable); in this way, under the action of differential pressure gradient, the gas will be penetrated by the high pressure side and low pressure side. Through the monitoring and processing of the pressure inside the low pressure side, the barrier parameters of the test samples can be obtained. It fully complies with GB1038, ASTM D1434 and other standards.
Reference standards
YBB 00082003, GB/T 1038, GB/T7755.1, ASTM D1434,ISO 2556,ISO 15105-1,JIS K7126-A
Configuration
Standard configuration: host, constant temperature controller, computer, professional software, special sampler, vacuum grease, fast quantitative filter paper, vacuum pump
Optional: sampling blade, vacuum grease, vacuum pump oil, fast quantitative filter paper, humidity generator
Note: The air source of the machine is ф 6mm polyurethane pipe; gas source and distilled water are provided by users
The device appearance diagram shows the standard device appearance, the appearance of customized devices may vary.
Are you a manufacturer or trading company?
We are the manufacturer and trading combo, which specialize in material testing instruments such as plastic package, medical device, facial mask, protective clothing and pharmaceutical package, etc. We located in Jinan, Shandong, China.
Do you have any certificate?
We have 22 utility model patents and 17 software copyright certificates.
How about the installation?
The user's manual specifies the installation requirements with details. We will advise the relative information in advance, such as power supply, space, required temperature, humidity, etc.
Do you have after-sales service?
We will carry out the equipment inspection before delivery. If the machine does not work properly, we can make a remote control service to help dealing with the failure. We promise to reply within 24 hours and provide solutions within 2 working days.
How about the warranty?
Our warranty is 12 month, lifelong free of charge! User just bear the materials cost and express charge out-of-warranty period.
How long does the delivery time?
For the regular machine, 3-5 working days. For the customized one, 30 days or so.